Johnson & Johnson DePuy Synthes FMS VUE II Manuel De L'opérateur page 58

fault Code
FC010 Remote Control 5V over-current
fault
FC011 Aspiration motor over-current
fault
FC012 Pump internal temperature limit
reached
FC013 Foot Pedal device failure
FC014 Remote device failure
FC015 Handpiece keypad device failure
fault description
58
fault Correction
Possible short circuit in Remote Control
connector or cable, replace Remote
Control .
Possible pump motor short circuit .
Discontinue use of the console . Contact
your DePuy Mitek representative .
Internal air temperature exceeds 60C .
Discontinue use of the console . Contact
your DePuy Synthes representative .
Foot pedal(s) are possibly shorted .
Ensure pedals are not pressed during
start up .
Replace foot pedal .
Remote Control button(s) are possibly
shorted .
Ensure buttons are not pressed during
startup .
Replace remote control .
Handpiece button(s) are possibly
shorted .
-Ensure buttons are not pressed during
startup .
-Replace shaver handpiece .