Micro Handpiece (Ref. 283512) - Johnson & Johnson DePuy Synthes FMS VUE II Manuel De L'opérateur

to...
Activate BLOODSTOP
Press button and hold
for 2 seconds .
Cancel BLOODSTOP
(Before end of cycle)
press FLOW+ blue
button to deactivate .
Gradually accelerate
the revolutions per
minute (RPM) to the
predetermined setting .

6.7.3 micro handpiece (ref. 283512)

The Micro Handpiece controls the shaver direction, speed, and the BLOODSTOP™ feature .
nOte: When the handpiece is activated, suction switches from the cannula to the handpiece.
press...
BLOODSTOP is activated .
BLOODSTOP mode stops .
Pump returns to normal flow
of 100 mL/min .
The Blade/Burr RPM will
gradually accelerate to the
predetermined setting shown on
the FMS VUE II System display
until the foot pedal is pressed
into the fully engaged position .
44
system response