Dibo JMB-C+ WWC Mode D'emploi page 119

1 C O N T R O L S C R E E N 1 ( O P E R AT I N G I N S T R U C T I O N S )
In this screen you can choose to check the various operating instructions. Move
the control stick to the left (no) or right (yes) to select.
Instructions (depending on chosen options):
2 C O N T R O L S C R E E N 2 ( T E M P E R AT U R E S E T T I N G )
In this screen you can set the desired burner temperature. Move the control
stick upwards (raise temperature) or downwards (lower temperature) to set the
desired temperature. Increase/decrease can be done in steps of 5 °C. Turn off
the burner immediately: Move the control stick quickly up / down. Minimum
value 0 °C - Maximum set point: depending on the factory setting. Operate to
the left: return to the main screen (at each other screen, same principle).
Operate to the right: navigate to the next operation menu (at each other screen,
same principle). At the top right, the current temperature is visualized and at the
top left the burner indication..
DiBO 23
E N
AC T I VAT I O N