Technical Features - Bartscher 900 MASTER Serie Mode D'emploi

The following instructions for set up and functioning refer to gas and mixed appliances belonging to
category II , with a power pressure for Butane/Propane (G30- G31) of 30/37 mbar and for
2H3+
Methane (G20) of 20 mbar. The data plate (fig. 3 -pag. 3) with all the information to refer to
regarding the appliance, is situated inside the right or left side of the control panel, depending on the
model.
The appliances have been checked in accordance with the European directives below.
2006/95/CE - Low Tension (LVD)
CEE 2004/108 - Electromagnetic Compatibility (EMC)
90/396/EEC - Gas Appliances
98/37/EC - Appliance to the directives
and the particular reference norms.
Declaration of compliance
The manufacturer declares that the appliances of their production are compliant with the above
mentioned EEC directives and requires that installation be done observing the norms in force,
particularly regarding the system for letting out fumes and air exchange.
Gas Fryer
A sturdy structure in steel placed on four feet, which make it possible to regulate the height in the
version with cabinet. The external coating is in Chrome-Nickel 18-10 stainless steel.
Each vat is provided with a thermostatic safety gas valve, which enables the regulation of the
temperature in a range from 140° C to 300° inclusive; safety is ensured by means of a thermo-
couple, which is kept active by the flame of the pilot burner.
The vat is made entirely of stainless steel.
It is heated by means of a stainless steel tubular burner, suitable for proper functioning at the high
temperatures to which it is exposed.
Electric Fryer
A sturdy structure in steel placed on four feet, which make it possible to regulate the height in the
version with cabinet. The external coating is in Chrome-Nickel 18-10 stainless steel.
It is provided with a thermostat which makes it possible to regulate the temperature in a range from
90° C to 300° C inclusive, safety is ensured by a manually operated safety thermostat.
The vat is entirely of stainless steel.
It is heated by an electric immersion heater, which is immersed in the oil.

TECHNICAL FEATURES

DESCRIPTION OF APPLIANCES
Pag. 25