Installing The Lock; Preparation For Mounting; Electrical Connections - Assa Abloy OneSystem 809N Notice De Montage

Electric security lock
Masquer les pouces Voir aussi pour OneSystem 809N:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

A
!
Prepare
and clean
lock pocket
Connecting cables
Installation
At tention!
Property damage due to missing profile cylinder in locked door: The electric security lock 809N locks a
closed door automatically and can then only be unlocked again via the profile cylinder. If a locking cylinder
is not installed, the door can only be opened by force. A construction locking cylinder must be installed
before the electric security lock 809N is installed.
Property damage from construction key: The use of a so-called construction key can destroy the lock.
Then the function is no longer guaranteed. Only use a suitable locking cylinder for operation of the lock.

Installing the lock

Warning!
Danger to life due to electric shock: Improper wiring is life-threatening and can ruin the electric security
lock 809N. The connection of the power supply may only be carried out by a trained, qualified person.
Risk of injury and life-threatening danger due to dangerous installation work. The machines and tasks
required for complete installation entail a considerable risk of injury. The cutting and preparations in
wood and metal may only be carried out by skilled, qualified personnel who are trained in the necessary
safety measures for the avoidance of severe injury, particularly when handling milling machines, saws, and
drilling machines.
Unsuitable doors reduce personal safety and intrusion protection: Only approved and technically flaw-
less doors are suitable for installation of the electric security lock 809N. Prior to the installation of the elec-
tric security lock 809N, the door must be checked to ensure that it is attached properly and is not warped.
The door must be approved for use of the electric security lock 809N.

Preparation for mounting

1
Create the lock pocket at a suitable mounting position in the door leaf. Factor in an additional 30 mm
for the cable loop for the depth.
2
Drill the holes for the fastening screws according to the figures shown below (depending on the
selected components).
3
Drill the holes for the lock fittings.
4
Clean the lock pocket and all holes by blowing them out or vacuuming.

Electrical connections

1
Prepare the wiring for the electric security lock 809N
(„Electrical connection", page 61).
2
Connect the cables for the power supply and control unit.
EN
57

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

809ne809n0

Table des Matières