Getting Started
Installing the Batteries
Slide open the battery compartment lid and insert
two R6 (size AA) dry batteries (not supplied).
Insert the batteries (negative end first) into the
battery compartment as shown below.
Note
Even if you replace the batteries, your manufacturer's code
settings or learned/programmed remote signals remain stored.
8
GB
Battery life
Under normal conditions, LR6 (size AA) alkaline
batteries will last up to one year. If the RM-VLZ620T
does not operate properly, the batteries might be
drained. If this happens, replace both batteries with
new ones.
Notes on batteries
Do not use an old battery with a new one, or mix different
types of batteries together.
If the electrolyte inside the battery should leak, wipe the
contaminated area of the battery compartment with a cloth and
replace the old batteries with new ones. To prevent electrolyte
from leaking, remove the batteries if you plan not to use the
RM-VLZ620T for a long period of time.