Restoring The Factory Settings - Sony Rm-Vlz620T Mode D'emploi

1
Press and hold SET for more than 3
seconds.
2
While keeping SET held down, press ,
then , and release three buttons at the
same time.
The SET indicator flashes three times and turns
off.
3 flashes
The hold function is set.
While all the buttons are locked, no function can
be operated.
If you press any key except SET, the SET indicator
will flash three times.
To unlock the controls
1
Press and hold SET for more than 3 seconds.
The SET indicator lights up.

While keeping SET held down, press , then
and release three buttons at the same time.
The SET indicator flashes three times and turns
off.
All the buttons will be unlocked.
The SET indicator
lights up.

Restoring the Factory Settings

You can clear all the settings (manufacturer's codes,
learned functions, and programmed consecutive
procedures), and reset the RM-VLZ620T to its
factory settings.
If you want to clear the settings for any Device Select
button, see page 13.
,
SET/SET
indicator
, 0

GB