Controlling Devices; Controlling Sony Devices With The Rm-Vlz620T - Sony RM-VLZ620T Mode D'emploi

Controlling Devices

Controlling Sony Devices with the
RM-VLZ620T
The RM-VLZ620T is preset at the factory to operate
Sony brand A/V devices set to any of the Device
Select buttons (see the table below).
Device Select Preset device
button
TV Sony TV
SAT (CBL) Satellite receiver (non-Sony)
DVR (PVR) Sony digital video recorder
DVD Sony DVD player
BD Sony Blu-ray Disc player
VCR Sony VCR
CD Sony CD player
AMP Sony receiver
* The five-digit code is the preset manufacturer's code.
Notes
 For button functions for each device, see "Table of Preset
Functions" (page 32).
 The remote control signals may be different for some devices
or functions. In this case, teach the remote control appropriate
signals to the RM-VLZ620T (page 18).
 To control other Sony devices that are not preset at the factory,
set the manufacturer's code for the device (page 12).
 Some devices that do not support infrared signals will not work
with the RM-VLZ620T.
Example: To operate a Sony DVD player
1
Press the desired Device Select button.
The selected Device Select button lights up when
you press it, and turns off when you release it.
10
GB
2
Press any button to control the device.
Note
If the device does not automatically turn on, press  to turn it
on.
To clear automatic power-on control for a
Factory
setting*
Sony device
02476
40847
22676
11033
11516
60032
70000
82586
Device
Select
buttons
The Device Select buttons are preset to automatically
turn on the selected device when pressed. To clear
auto power-on control, perform the procedure below.
See "Table of Preset Functions" (page 32) for the
functions of buttons for each device.
SET/SET
indicator
Device
Select
buttons
,