Programming The Rm-Vlz620T Consecutive Procedures - Sony RM-VLZ620T Mode D'emploi

4
Enter the desired channel number.
Notes
 You can press up to four buttons among the number
buttons, , and ENTER.
If you press any other button, the SET indicator flashes once
and turns off, and the setting is cancelled.
 If you press four buttons, the setting mode ends and the
channel will be programmed.
5
Press SET to complete the programming.
The SET indicator flashes three times, and the
indicators turn off.
3 flashes
You can now select the channel by pressing just
the number 9 button.
To cancel the process
Press and hold SET for more than 3 seconds. The
indicators turn off.
To clear the programme
1
Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired
Device Select button.

Enter  -  - 1.
The SET indicator flashes three times.

Press and hold the programmed number button
you want to reset for more than 3 seconds.
When the programme is cleared, the SET
indicator flashes three times and turns off.

GB
Programming the RM-VLZ620T
Consecutive Procedures
You can programme a consecutive procedure and
perform them by pressing just one button.
You can programme up to 16 consecutive steps to
each of the SYSTEM CONTROL buttons (1 – ) or
the Device Select buttons.
To perform the programmed procedure:
– Press the programmed SYSTEM CONTROL
button.
– Press and hold the programmed Device Select
button for more than 2 seconds*.
* If you release the button within 2 seconds, the Device Select
button will function to select the device mode.
Notes
 If another consecutive procedure has already been set on the
button, it will be overwritten with the new one.
 If the button has already learned a function, the setting
procedure will be cancelled. Clear the learned function (page
22).
Example: To programme a consecutive
procedure to watch a DVD to the SYSTEM
CONTROL 2 button:
Power on the TV.

Power on the DVD player.

Power on the amplifier.

Set the input selector of the amplifier to DVD input.

Set the input mode of the TV to VIDEO 1.

Start DVD playback.