Checking The Manufacturer's Code You Have Set - Sony RM-VLZ620T Mode D'emploi

To cancel the process
Press SET anytime.
Notes
 If all codes have been cycled through once, the SET indicator
and selected Device Select button flash once and turn off.
 If the setting is incomplete, the SET indicator flashes once and
the indicators turn off.
 If you still cannot operate the device, even after setting the
manufacturer's code using the Search function, another code
may be available. Repeat the above steps to search for another
code that works for most functions of your device.
Checking the manufacturer's code you
have set
You can check the manufacturer's code number you
have set.
Example: To check the code number (50831)
you have set for the TV
1
Press and hold SET for more than 3
seconds.
While keeping SET held down, press the
desired Device Select button, then release
both buttons.
The selected Device Select button lights up.
2
Enter  -  - .
The SET indicator flashes three times to indicate
that the setting mode has been entered.
3 flashes
3
Press .
The SET indicator
lights up.
4
The SET indicator and selected Device
Select button flash in sequence according
to the manufacturer's code you set. Count
the number of flashes to determine the
code number.
Digit SET
First flashes once
Second flashes twice
Third flashes 3 times
Fourth flashes 4 times
Fifth flashes 5 times
* Flashing rapidly indicates "0. "
If you want to check once more, press .
5
Press SET to finish.
The indicators turn off.
TV Code
flashes 5 times = 5
flashes rapidly* = 0
flashes 8 times = 8
flashes 3 times = 3
flashes once = 1
1
GB