Setting The Manufacturer's Code For Non-Sony Devices; Setting The Manufacturer's Code - Sony RM-VLZ620T Mode D'emploi

Setting the Manufacturer's Code

for Non-Sony Devices
You can use the RM-VLZ620T for major brand A/V
devices. To use with non-Sony A/V devices, or Sony
devices that are not preset at the factory (see table below
for factory setting), you need to set the manufacturer's
code for each device to any of the eight Device Select
buttons.
Device Select Preset
button device
TV Sony TV
SAT (CBL) Satellite receiver (non-Sony)
DVR (PVR) Sony digital video recorder
DVD Sony DVD player
BD Sony Blu-ray Disc player
VCR Sony VCR
CD Sony CD player
AMP Sony receiver
* The five-digit code is the preset manufacturer's code.
Notes
 Only a TV or projector can be assigned to the TV Device Select
button. You can assign any device to the other Device Select
buttons. For button functions for each device, see "Table of
Preset Functions" (page 32).
 If no operations are performed for 10 seconds while setting, the
setting will be cancelled, and must be restarted.
 Some devices that do not support infrared signals will not work
with the RM-VLZ620T.
1
GB
Setting the manufacturer's code
Factory
setting*
02476
40847
22676
11033
11516
60032
70000
82586
Example: To set up a Philips TV (01454)
1
Refer to the supplied "Manufacturer's
Code List," and find the five-digit
manufacturer's code for the desired
device.
If more than one manufacturer's code is listed, use
the code that is listed first.
It is recommended to keep a note of the codes for
your devices, for easy reference later.
Device
TV
SAT
DVR
DVD
BD
VCR
CD
AMP
Note
If you cannot find the manufacturer's code, use the Search
function (page 14).
SET/SET
indicator
Device
Select
buttons
Number
buttons
Manufacturer's code
(01454)