Teaching The Device Select Or System Control Buttons - Sony Rm-Vlz620T Mode D'emploi

2
Enter  - 0 - .
The SET indicator flashes three times to indicate
that the setting mode has been entered.
3 flashes
3
Press the desired Device Select button.
When the learned functions is cleared, the SET
indicator flashes three times and the indicators
turn off.
3 flashes
To cancel the process
Press SET anytime.
Teaching the Device Select or SYSTEM
CONTROL buttons
For example, if you want to switch your amplifier to
DVD input, teach an input select signal to the DVD
Device Select button so that the amplifier is
automatically switched to DVD simply by pressing
the DVD Device Select button. (For this operation,
the amplifier should first be turned on.)
Notes
 Use new batteries in both remote control units.
 If a consecutive procedure has been programmed to the button
(page 24), the setting procedure will be cancelled.
SET/SET
indicator
Device
Select
buttons
, 8
SYSTEM
CONTROL
buttons
1
GB