Sony RM-VLZ620T Mode D'emploi page 17

Example: To set the DVD Device Select
button to control the volume via the
amplifier
1
Press and hold SET for more than 3
seconds.
While keeping SET held down, press the
Device Select button for the device you
want to control the volume via the
amplifier, then release both buttons.
The selected Device Select button lights up.
2
Enter  -  - .
The SET indicator flashes three times to indicate
that the setting mode has been entered.
3 flashes
3
Press the Device Select button to which
the connected amplifier is assigned.
The SET indicator flashes three times and the
indicators turn off.
3 flashes
To cancel the process
Press SET anytime.
The SET indicator
lights up.
To reset the volume control
1
Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the Device
Select button you want to reset.

Enter  -  - .
The SET indicator flashes three times.

Press the same Device Select button you pressed
in Step 1.
The SET indicator flashes three times and the
indicators turn off.
1
GB