Pin Assignment Tables - Festo MPS 8082795 Notice D'utilisation

Storing/Conveyor station
Note
The PC and access point are already connected to a multiple plug socket.
This is supplied via an IEC connector with the corresponding country plug.
Certifications
CE marking
IC (Canada)
FCC-ID (USA)
7.2

Pin assignment tables

SysLink – Motor Controller board
Function SysLink
I0 13
I1 14
I2 15
I3 16
I4 17
I5 18
I6 19
I7 20
Q0 1
Q1 2
Q2 3
Q3 4
Q4 5
Q5 6
Q6 7
Q7 8
50
EMC directive, ROHS directive, low voltage directive
4216A-IR850LB1
KA2IR850LB1
Color Designation
Gray-pink Station referenced/in initial position
Red-blue Error at the station
White-green Station is busy
Brown-green Storage area full / Input error
White-yellow Station processes work order
Brown-yellow Station ready to receive color/number code
White-gray Feedback storage / retrieval mode active (0 = storage, 1 = retrieval)
Gray-brown N/A
White Home the station
Brown Reset error
Green Mode 0 = place into storage, 1 = remove from storage
Yellow Color/number code, bit 0
Gray Color/number code, bit 1
Pink Color/number code, bit 2
Blue Strobe (accept color code)
Red Enable automatic mode (EnAuto)
© Festo Didactic 8083287