Fastening The Lens And The Camera To The Internal Slide - Videotec ULISSE MAXI Manuel D'instructions

7.3.2 Fastening the lens and the camera
to the internal slide
It is necessary to insulate the camera body
from the attachment slide in order to
prevent interference with the video signal.
Maximum overall weight allowed for
camera and lens must not exceed 7.6kg
(16.8lb).
Connect the camera (02) to the lens (01).
Fasten the L-shaped small aluminium bracket (03) to
the camera by means of the nylon washer (04) and
the 1/4" screw (05).
Fig. 9
Position the lens on the slide (02) interposing the
plastic spacer (01). Fasten the whole assembly by
means of the nylon washer (03)and the 1/4" screw
(04).
MNVCUPTMAXB_1511_EN
01 02
03
04
If necessary, use the additional spacers to correctly
position the camera and lens.
02
03
04
Fig. 10
Fasten the aluminium plate (01) on the slide by
means of the screws and relative washers (02).
05
Fig. 11
Fix the L-bracket with the screw.
Fig. 12
01
01
02
15