Assembling And Installing; Assembly; Installation; Opening Of The Housing - Videotec HGV Manuel D'instructions

6 Assembling
and installing
Only specialised personnel should be
h
allowed to assemble and install the device.

6.1 Assembly

Mount the sunshield to the housing with the 4
screws and washers provided as standard.
Fig. 01

6.2 Installation

Secure the housing to the bracket with
the 4 screws provided as standard.
Fig. 02

6.2.1 Opening of the housing

Undo the 12 captive screws
Fig. 03
Lift the upper casing with integrated sunshield and
leave it hanging to the sturdy anchoring cable.
Fig. 04
6.2.1.1 Fastening of the lens and
camera to the internal slide
Hook the camera (02) to the lens (01).
Fasten the L-shaped small aluminium bracket of
the selected length (03) to the camera by means
of the nylon washer (04) and the 1/4" screw (05).
01
Fig. 05
Position the lens on the slide (02) interposing
the plastic spacer (01), and fasten the
whole assembly by means of the nylon
washer (03)and the 1/4" screw (04).
If necessary, use the additional spacers to
correctly position the camera and lens
01
02
03
04
Fig. 06
02
03
04
05
5