Signal Cable Connection; Video Cable Connection - Videotec ULISSE MAXI Manuel D'instructions

8.5 Signal cable connection

All signal cables must be grouped together
by means of a strap.
Fig. 33

8.5.1 Video cable connection

CAUTION! In order to reduce the risk of fire,
only use UL Listed or CSA certified cables
with sections greater than or equal to
0.14mm² (26AWG).
CDS installation type (Cable Distribution
System). The installation is type TNV-1, do
not connect it to SELV circuits.
24
Connect the screen and central cable
respectively to the GND and VIDEO
terminals. The terminals accept cables with
sections between 0.5mm² (20 AWG) and
0.08mm² (28AWG).
GND
VIDEO
Fig. 34
Standard version.
GND
VIDEO
Fig. 35 Version with LED illuminators.
MNVCUPTMAXB_1511_EN