Manual Control Menu (Limits); Preset Menu; Preset Menu (Edit Preset) - Videotec ULISSE MAXI Manuel D'instructions

10.1.8.2 Manual Control Menu (Limits)

It allows you to configure the following parameters:
1. Pan Limits: Enables the limits of Pan.
2. Pan Start: Sets the start limit of Pan.
3. Pan End: Sets the end limit of Pan.
Tilt Start: Sets the start limit of Tilt.
4.
Tilt End: Sets the end limit of Tilt.
5.
LIMITS
------------------------
1>PAN LIMITS
2 PAN START
3 PAN END
4 TILT START
5 TILT END
Fig. 101
This is a dynamic self-configuration menu based on
the choice made and shows the parameters on which
it is possible to operate.

10.1.8.3 Preset Menu

Edit Preset: To access the Modifica Preset
1.
(Preset Modification) menu.
Utility Preset: To access the Utilità Preset (Preset
2.
Utility) menu
PRESET
------------------------
1>EDIT PRESET
2 PRESET UTILITIES
Fig. 102
MNVCUPTMAXB_1511_EN
: N
: + 0.00
: + 0.00
: + 0.00
: + 0.00
>
>

10.1.8.4 Preset Menu (Edit Preset)

It allows you to configure the following parameters:
1. Number: The Preset number to be edited.
2. Enabling: Enabling preset.
3. Pan: Pan position in degrees.
Tilt: Tilt position in degrees.
4.
Speed: Position approaching speed when
5.
preset is restored by the Patrol and Autopan
functions.
6. Pause: The dwell time in seconds before starting
the next movement in Patrol.
7. Text: The text that is displayed when the preset
position is reached.
Go To Preset?: Obliges the Pan & Tilt to move to
8.
the selected Preset position.
Enable Movements: It allows you to choose a
9.
new frame.
EDIT PRESET
------------------------
1>NR. :
2 ENAB.:
3 PAN : +
4 TILT : - 40.00
5 SPEED:
6 PAUSE:
7 TEXT : PRESET 001
8 GO TO PRESET?
9 ENABLE MOVEMENTS
Fig. 103
From the menu it is possible to directly store the
preset by sending the Iris Close command that
enables the pan & tilt movements.
1
N
0.00
20.00
5
>
47