Preparatory Work Before Installation; Attaching The Bracket; Cables Management - Videotec ULISSE MAXI Manuel D'instructions

6.5 Preparatory work before
installation

6.5.1 Attaching the bracket

For installations subject to vibrations, only
use the parapet bracket.
Different types of supports are available (11
Accessories, page 52). Choose a suitable bracket for
the installation and follow all the instructions in the
suggested chapter.
Take special care when attaching and
fastening down the apparatus. The
clamping system must be able to support
at least 4 times the weight of the entire
equipment, including P&T, lenses and
camera.
The device should be assembled vertically.
Any other position could impair the
performance of the appliance.
Do not attach the device upside down.
MNVCUPTMAXB_1511_EN

6.5.2 Cables management

The connection cables should not be
accessible from the outside. It is necessary
to fasten the cables securely to the support
in order to prevent excessive weight pulling
them out accidentaly.
You must use cables suited to the type of
installation.
Insert the cables into the support so that they
protrude by about 50cm.
50cm
Fig. 5
50cm
13