Motion Recall Menu; Display Menu; Digital I/O-Options Menu - Videotec ULISSE MAXI Manuel D'instructions

10.1.8.8 Motion Recall Menu

The unit can be configured so that, after a period of
non-use, it carries out a movement function selected
by the operator.
Movement Type: Type of movement to be
1.
loaded (None, Home, Autopan, Patrol).
Movement Delay: The standby time of the
2.
joystick is expressed in seconds.
MOTION RECALL
------------------------
1>MOVEMENT TYPE :
2 MOVEMENT DELAY:
Fig. 107

10.1.9 Display Menu

1. Actual Position: Is not set to OFF, you are able
to select the display mode of the Pan, Tilt, Zoom,
Focus, and Iris values.
Preset Name: If not set to OFF, you are able to
2.
select the display mode of the text associated
with the last Preset position. It is possibile to
select timed (1 s, 3 s and 5 s) or a constant
(Const) display.
Pan & Tilt ID: If not on OFF, it shows the ID of
3.
the product.
Alarms: If not set to OFF, you are able to
4.
select the display mode of the alarm texts. It is
possibile to select timed (1 s, 3 s and 5 s) or a
constant (Const) display.
MNVCUPTMAXB_1511_EN
5.
6.
7.
8.
NONE
60
Fig. 108
This is a dynamic self-configuration menu based on
the Pan & Tilt model.

10.1.10 Digital I/O-Options Menu

1.
2.
3.
Fig. 109
Received Commands: If enabled, it shows the
received serial commands.
Horizontal Delta: Horizontal displacement of
the menu texts to improve centring.
Vertical Delta: Vertical displacement of the
menu texts to improve centring.
Video Signal: Video signal format.
DISPLAY
------------------------
1 ACTUAL POSITION :
2 PRESET NAME
3 UNIT ID
4 ALARMS
5 RECEIVED COMMAND:
6 HORIZONTAL DELTA:
7 VERTICAL DELTA
8 VIDEO SIGNAL
Alarms: Access the alarm menu.
Washer: Access the Washing System menu.
Communications: Access the Communications
menu.
DIGITAL I/O-OPTIONS
------------------------
1>ALARMS
2 WASHER
3 COMMUNICATIONS
ON
: 5 S
: ON
: ON
ON
35
: 10
: PAL
>
>
>
49