Improper Use; Basic Safety Information; Qualification; Proper Condition - Mennekes AMTRON Manuel D'utilisation Et Guide D'installation

The device is exclusively for use as a single charging
point. If required, the device can be connected to a
Backend-System, e.g. the chargecloud.
In some countries there are statutory regulations that
require the charging point to switch to a de-energised
state, as soon as a load contactor sticks (welding detec-
tion). A shunt release switches the charging point to de-
energised status if an error occurs.
Legal requirements in some countries provide additional
protection against electric shock. A possible additional
protective measure can be the use of a shutter.
The device may only be operated taking into account all
international and national regulations. Please observe the
following international regulations or the respective natio-
nal transposition:
„ IEC 61851-1
„ IEC 62196-1
„ IEC 60364-7-722
Read and observe these instructions as well as all additio-
nal documentation for the use of the device.

2.3 Improper use

Using the device is safe only when used as intended.
Any other use, as well as changes to the device, are con-
sidered non-intended use and therefore are not permitted.
The owner / operator is responsible for the intended and
safe use. MENNEKES Elektrotechnik GmbH & Co. KG
accepts no liability for any consequences arising from
non-intended use of the device.
4

2.4 Basic safety information

2.4.1 Qualification

Some activities in this manual require expertise in electri-
cal engineering. Performing activities in
the absence of knowledge or lack of qualifications can
result in serious accidents and death.
f Only carry out tasks for which you are
qualified and have been instructed.
f Note the references to a qualified electrician in this
manual.

2.4.2 Proper condition

Damaged device
If the device is damaged or defective, has a defective
housing or missing components, people can be serious-
ly injured by electric shock.
f Avoid collisions and improper handling.
f Do not use the device in case of damage / defects.
f Mark a damaged device, so that other persons can-
not use it.
f Have a qualified electrician rectify the damage wit-
hout delay.
Improper maintenance
Improper maintenance can affect the safety of the
equipment and cause accidents. This can seriously inju-
re or kill people.
f Observe the maintenance schedule.
f Commission a qualified electrician to perform regular
maintenance.

2.4.3 Observing supervisory duties

Persons, especially children, and animals who are not
fully able to assess potential hazards pose a danger to
themselves and to others.
f Keep away from the device and charging cable.
f Keep animals away from the device and charging
cable.