Inserting The Sim Card; Switching On The Device - Mennekes AMTRON Manuel D'utilisation Et Guide D'installation

6.3 Inserting the SIM card

T
T
ATTENTION
Damage to components
Damage to components or the charging station from elec-
trostatic discharging.
f Touch an earthed metal part before inserting the
SIM card.
Fig. 16: Inserting the SIM card
f Insert SIM card in the micro-SIM slot (1).

6.4 Switching on the device

T
Electric shock hazard when devices are damaged
If a damaged device is used people can be seriously inju-
red or killed through an electric shock.
f Do not use the device if it is damaged.
f Mark the damaged device to ensure that no one conti-
f Eliminate the damage immediately.
f Take the device out of service if necessary.
Precondition:
„ Device is installed correctly.
„ Device is in a proper condition.
„ For version Professional+ E 7,4 / 22 only:
1
Î "5.3.2 Providing fuse protection"
„ During the initial setting-up process, the device was
Î "6.6 Checking the device"
f Switch on the power supply and check.
Î "6.5 Monitoring the power supply"
9
T
DANGER
nues using it.
The necessary fusing devices (residual current device,
circuit breaker, possibly a shunt release) are incorpo-
rated in the indoor installation, and are functional and
switched on.
inspected in accordance with IEC 60364-6 and the
applicable national regulations (e.g. in Germany: DIN
VDE 0100-600).
LED "Standby" is illuminated on the LED information
panel.
EN
27