Setting The Colour Scheme For The Led Information Field; Closing The Device - Mennekes AMTRON Start Manuel D'utilisation Et Guide D'installation

5.8.2 Setting the colour scheme for the LED information
field
The configuration switch S6 is used to set the colour
scheme (green / blue) for "Ready for operation / Charge".
LED
Ready for operation
Charge
Wait period
Fault
Î "3.11 LED Info bar"
f If necessary, set colour scheme.
f Restart the device.
S6 = OFF S6 = ON
Standard
blue green
green blue
white
red

5.9 Closing the device

4
Fig.: 19. Closing the device
f Lift the front panel (1) upwards and secure it with the
screws (2).
f Fit the upper part of the enclosure (3) and secure it with
the screws (4) and (5). Use supplied shortened Allen key.
Screw
(2)
(4)
(5)
3
2
2
5
1
Torque
0.5 Nm
1.2 Nm
1.2 Nm
19
EN