Cable Suspension; Energy Meter; Key Switch; Stop Button - Mennekes AMTRON Start Manuel D'utilisation Et Guide D'installation

3.6 Cable suspension

The device is designed in such a way that the charging
cable can be hung directly on the housing.
Fig.: 8. Cable suspension

3.7 Energy meter

You can read your energy consumption directly from your
device at any time.
Fig.: 9. Energy meter

3.8 Key switch

The key switch is used to assign access authorizations.
This allows you a permanent or one-time release and a
permanent shutdown.
Fig.: 10. Key switch
10
The keys can be reordered quoting the code number on
the key and lock:
Î "3.1 Scope of delivery"

3.9 Stop button

For devices with stop button and without key switch you
end the charging process with a light touch of the stop but-
ton.
Fig.: 11. Stop button

3.10 Multi-function button

For devices with multi-function button and without key
switch you end the charging process with a light touch of
the multi-function button. In addition, on all devices with
multi-function button you can easily switch the RCD and
the MCB back on from outside if there is a fault.
Fig.: 12. Multi-function button