Mennekes AMTRON Start Manuel D'utilisation Et Guide D'installation page 39

Rear view
Fig.: 4. Rear view (example)
1. Bottom part of enclosure
2. Fastening screws for upper housing part
3. Air outlet
4. Recess for supply line / cable duct
5. Fastening bores
6. Cable glands
Interior view of front panel
Fig.: 5. Interior view of front panel (example: with type 2
charging socket for use with separate charging cable)
1. Configuration switches
2. Actuator (plug interlock)
1)
3. Charging socket type
1)
For versions with Type 2 charging socket only
1)
Î "3.5 Device variants"
Interior view of lower enclosure part
Fig.: 6. Interior view of lower enclosure part (example)
1. Energy meter
1)
2. MCB
1)
3. Actuating element for multi-function button
4. Charging contactor point
5. Phase sequence relay
6. Cable glands
7. Controller (CPX)
8. RCD
1)
9. Power unit
3)
10. Connection terminals for mains connection
11. Actuator control
Optional
1)
Î "3.4 Optional equipment"
Not for single-phase devices (3.7 kW / 7.4 kW) without
2)
personal and circuit protection
Î "3.4 Optional equipment"
For versions with Type 2 charging socket only
3)
Î "3.5 Device variants"
1)
2)
EN
7