Cable Suspension; Energy Meter - Mennekes AMTRON Manuel D'utilisation Et Guide D'installation

Rear view
Fig. 4: Rear view
1. Bottom part of enclosure
2. Fastening screws for upper housing part
3. Air outlet
4. Pre-punched aperture for supply line / cable duct
5. Fastening bores for mounting
6. Cable glands
Interior view of lower enclosure part
8
7
6
5
4
Fig. 5: Inside view (example: version Professional+ E
7,4 / 22)
8

1. Energy meter

2. ECU
3. Charging contactor point
4. Terminals for voltage supply
5. Relay for shunt release
6. Actuator controller
7. Power adapter
8. Control fuse
For version Professional+ E 7,4 / 22 only
1)
For versions with Type 2 charging socket only
2)
Î "3.9 Device variants"

3.4 Cable suspension

The charging cable can be hung directly on the housing.
Fig. 6: Cable suspension
1
3.5 Energy meter
Energy consumption can be read-out on the energy meter.
2
Fig. 7: Energy meter
3
1)
2)