Mode "Backend-System; Setting The Maximum Charging Current; Advanced Settings - Mennekes AMTRON Manuel D'utilisation Et Guide D'installation

6.2.3 Mode "Backend-System"

The device can be connected to a Backend-System
via mobile telephony. The device is operated via the
Backend-System. To do this a micro-SIM card is required.
A connection to a Backend-System via Ethernet,
USB or WLAN is not possible.
f Insert the SIM card.
Î "6.3 Inserting the SIM card"
f Navigate to the "Settings" menu and set the following
parameters:
Parameters Settings / description
Connection Type f Select "GSM".
Access Point Name Name of the access point of your
(APN) mobile access
APN Username User name for the access point
of your mobile access
APN password Password for the access point of
your mobile access
OCPP Mode Selection of the OCPP communi-
cation protocol
If "OCPP Mode" = "OCPP-S 1.5" or "OCPP-S 1.6":
SOAP OCPP URL of URL address of the Backend-
backend (standard System
OCPP)
If "OCPP Mode" = "OCPP-J 1.6":
WebSocket JSON WS / WSS-URL of the OCPP
OCPP URL of Backend-Systems
Backend
If "OCPP Mode" = "OCPP-B 1.5" or "OCPP-B 1.6":
Not relevant for the device
Hostname (Binary Not relevant for the device.
OCPP)
Portnumber (Binary Not relevant for the device.
OCPP)
„ Information concerning APM is provided by
your mobile network operator
„ Information concerning OCPP is provided by
your Backend-System operator.
f Click the "Save" button.
f If necessary, make the appropriate advanced settings
20
in the "Operator" menu, e.g. enter the PIN of the SIM
card.
f When the configuration is concluded, click the "Save &
Restart" button.

6.2.4 Setting the maximum charging current

f Navigate to the "Settings" menu and set the following
parameters:
„ "Operator Current Limit (A)"
f Click the "Save" button.
f If necessary make the appropriate extended settings in
the "Operator" menu.
f When the configuration is concluded, click the "Save &
Restart" button.

6.2.5 Advanced settings

In the "Operator" menu, extended settings are provided
under "Settings", in addition to the parameters.
The web interface includes several possibilities
to make settings that the device does not sup-
port. In the section "3 Product description" >
"Equipment features" there is an overview of the
device functions.