Configuring Via The Web Interface - Mennekes AMTRON Manuel D'utilisation Et Guide D'installation

If the driver is not automatically installed under
the Windows operating system:
f Navigate to "Control Panel > "Device
Manager" > "Other devices".
f Right-click "RNDIS/Ethernet Gadget" >
"Update Drive Software" > "Search for driver
software on the computer" > "Select from
a list of device drivers on the computer >
"Network Adapter" > "Microsoft Corporation"
> "NDIS-compatible remote device".
9 The driver will be installed.

6.2 Configuring via the web interface

Configuration occurs via the web interface in an Internet
browser. The web interface is password-protected.
f Open the Internet browser.
The web interface can be reached via
http://192.168.123.123/operator.
f Enter password.
Password: See Set-up data sheet.

f Configure the device taking into account the condi-
tions and customer requirements.
f Save the configuration that has been made by clicking
the "Save" button.
f When the configuration is concluded, click the "Save &
Restart" button.
The web interface includes several possibilities
to make settings that the device does not sup-
port. An overview of the device function is provi-
ded in section "3 Product description" >
"Equipment Features".
18
Structure of the web interface
1
2
5
Fig. 15: Structure of the web interface
1. Menu
2. Parameters
3. Settings / status
4. Comment / information
5. Buttons for saving, restarting and loading the presets
The following menus are displayed in the web interface:
„ "State"
„ "Settings"
„ "> Default"
„ "Operator"
„ "System"
„ "Documentation"
"State" menu
Here you cannot make any settings. Status information of
the device is displayed, e.g.
„ Current state
„ Fault messages
„ Configuration, e.g. LED colour scheme (green / blue)
„ Backend system
3 4