Normal Intended Use; Residual Risks; Safe Working; Symbols Machine - ATIKA BWS 400-2 Notice Originale

Symbols machine

Carefully read opera-
tor's manual and the
safety instructions be-
fore starting the
machine and observe
the instructions when
operating.
Wear safety shoes.
Use light-duty breathing
protection.
Risk of injuries of fingers
and hands by the saw
blade.
Shut off engine and remove power cord before
performing cleaning, maintenance or repair work.
Warning of hot surfaces. Danger of burning! Do not touch
hot engine parts.
Electrical danger -
230V.
Electrical devices do not go into the domestic rubbish. Give
devices, accessories and packaging to an eco-friendly
recycling.
According to the European Directive 2012/19/EU on electrical and
electronic scrap, electrical devices that are no longer serviceable must
be separately collected and brought to a facility for an environmentally
compatible recycling.

Normal intended use

 This machine is designed for cross cutting firewood in the house and
hobby field.
 Cutting round material having a diameter smaller than 30 mm or
greater than 140 mm is not allowed as these pieces can not be held
safely.
 The length of the material to be cut must not exceed 1000 mm. The
length of the material must be 300 mm as a minimum.
 Only high-quality saw blades acc. to EN 847-1 up to a max. diameter
of 405 mm must be used.
 Because it has no extraction device this machine must only be used
outdoors.
 Only work pieces are allowed to be processed which can be safely
placed and held in the jigging device.
 The use of saw blades made of HSS steel (high-alloy high speed
steel) is not permitted since this steel is hard and brittle. Risk of injury
through saw blade breakage and expulsion of saw blade pieces.
 The intended usage also includes compliance with the operating,
servicing and repair conditions prescribed by the manufacturer and
following the safety instructions included in the instructions.
 The relevant accident prevention regulations for the operation as well
as the other generally acknowledged occupational medicine and
safety rules must be complied with.
 Any other use is deemed not to be intended use. The manufacturer is
not liable for any type of damage resulting from this: the user bears
the sole risk.
 Unauthorized modifications to the saw preclude any liability of the
manufacturer for resulting damages of any kind.
 The saw may only be equipped, used and serviced by persons who
are familiar with it and have been instructed on the hazards. Repair
works may only be carried out by us or by a customer service agent
nominated by us.
12
 The machine may not be used in a potentially explosive environment
 Metallic parts (wires etc.) have unconditionally to be removed from
Wear protective
gloves.

Residual risks

Even if used properly, residual risks can exist even if the relevant safety
regulations are complied with due to the design determined by the
intended purpose.
Wear eye and ear
Residual risks can be minimised if the "Safety instructions" and the
protection.
"Normal intended use" as well as the whole of the operating instructions
are observed.
Wear protective
Observing these instructions, and taking proper care, will reduce the risk
clothing.
of personal injury or damage to the equipment.
It is prohibited to 
remove or modify
protective.







Direction of saw

blade rotation
In addition, in spite of all the precautionary measures taken, non-obvious
residual risks can still exist

Safe working

Woodworking machines can be dangerous if not used properly. If
electrical tools are used, the fundamental safety precautions must
be met to preclude the risks of fire, electric shock and injuries to
persons.
Before starting this device, read and keep to the following advice.
Also observe the preventive regulations of your professional
association and the safety provisions applicable in the respective
country, in order to protect yourself and others from possible injury.


 Familiarize yourself with the device before using it with the help
 Be attentive. Be careful what you do. Behave sensibly when
 This unit may not be used by persons having reduced physical,
 The machine must not be operated by children.
 Persons under the age of 18 must not operate the circular saw.
 Persons who have not read this operating instruction manual may not
 Children must be supervised to make sure that they do not play with
 Keep children away from machine.
 Never leave the saw unattended.
 Keep other persons away.
or be exposed to rain.
the material to be cut.
Danger of injury of fingers and hands by the tool (saw blade) or work
piece, e.g. when replacing the saw blade.
Injury by catapulted workpiece parts.
Throwback of the workpiece or workpiece parts.
Breaking or catapulting of saw blade.
Risk from electricity, by using non-standard electrical connections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for longer
periods of time without ear protection.
Emission of harmful wood dusts. Wear therefore a protective mask.
Noise emission: Use saw blades designed for noise reduction and
keep the machine in a good condition.
.
Pass the safety instructions on to all persons who work with the
machine.
Keep these safety instructions in a safe place.
of the operating instructions so that you are sufficiently trained
in its use, setting and operation.
working. Do not use the device when you are tired or under the
influence of drugs, alcohol or medica-ments. One moment of
care-lessness when using the device can result in serious
injuries.
sensory or cognitive abilities or by persons with lack of adequate
knowledge or experience unless they are supervised or instructed by
a person who is responsible for them.
operate this unit.
the device.