Amann Girrbach argovent 2 Mode D'emploi page 25

6 Installation
6.1 When switching from Argovent to Argovent 2
▷ Pull mains plug.
▷ Unscrew the six screws on the rear of the fur-
nace and remove the back panel.
Fig. 2
▷ Remove gas hose at both ends.
Fig. 3
I N S T A L L A T I O N
▷ Remove insulating stone.
Fig. 4
▷ Remove Argovent.
▷ Remove floor plate.
▷ Remove ceramic tube.
Fig. 5
E N
25