Machine Specifications; Components And Interfaces; Intended Use - Amann Girrbach argovent 2 Mode D'emploi

M A C H I N E S P E C I F I C A T I O N S
5

Machine Specifications

E N 5.1 Delivery Scope
_ Sintering compartment Argovent 2
▪ Retort weight
▪ Protective gas retort
▪ Sintering cover
▪ Separating disc
▪ Sintering bowl
▪ Sintering base
_ Floor plate of Argovent 2 (8 mm)
_ Gas hose with angle piece
_ Bow/cover tongs
_ Sintering pearls
_ Auxiliary powder
_ User Manual
▷ After unpacking, check the machine for com-
pleteness and possible transport damages.
Please claim any transport damages immedi-
ately with your supplier.
5.2

Intended Use

Argovent 2 is an enclosed sintering compartment
for sintering milled CoCrMo units in a protective-
gas atmosphere.
This sintering compartment has been specially
developed for sintering the Sintron material. Only
the Sintron materials, whose properties and sin-
tering temperatures are known, may be used. Any
other or further-going use, such as the processing
of other products than those intended for, as well
as the handling of hazardous substances or mate-
rials hazardous to one's health, does not apply as
under the intended use.
24
5.3

Components and interfaces

Fig. 1 Sintering compartment Argovent 2
1 Retort weight
2 Protective gas retort
3 Sintering cover
4 Separating disc
5 Sintering bowl
6 Sintering base
The Teflon hose piece connects the gas
tube of the sintering base with the push-in
angle piece of the gas hose.
▷ Do not remove the Teflon hose piece
from the gas tube!
1
2
3
4
5
6