Meaning Of Warnings And Symbols; Safety Instructions For Installation And Operation; General Safety Precaution; Intended Use - Daikin RoCon+ HP1 ETSH16P30D Manuel D'utilisation

▪ Operating manual for the heat pump (format: paper – included in
the indoor unit scope of delivery)
▪ Installation instructions for the outdoor unit (format: paper – in-
cluded in the outdoor unit scope of delivery)
▪ Installation instructions for optional components (format: paper –
included in the scope of delivery of the respective component)
▪ Reference manual for the installer of the indoor unit (format: di-
gital)
▪ Reference manual for the installer of the outdoor unit (format: di-
gital)
The reference manuals contain the complete set of technical data, a
detailed description of best practices and information on mainten-
ance, troubleshooting and decommissioning.
The digital documents and the latest editions of the supplied docu-
mentation are available on the regional Daikin website or, on re-
quest, from your dealer. The Daikin website is easy to access using
the QR code on your device.
1.1.2

Meaning of warnings and symbols

Warnings in this manual are classified according to their severity and
probability of occurrence.
DANGER
Indicates an immediate danger.
Disregarding this warning can lead to serious injury or
death
WARNING
Indicates a potentially dangerous situation
Disregarding this warning may result in serious physical in-
jury or death.
CAUTION
Indicates a situation which may cause possible damage
Disregarding this warning can cause damage to property
and the environment and result in minor injuries.
This symbol identifies user tips and particularly useful in-
formation, but not warnings or hazards
Special warning signs
Some types of danger are represented by special symbols.
Electric current
Risk of burns or scalds
General description
1 Handling instructions are shown as a list. Actions where the se-
quential order must be adhered to are numbered.
è Results of actions are identified with an arrow.
[Operating mode]: Parameters are shown in square brackets.
[→ Main menu]: The position of menus and functions is shown in
square brackets with →.
1.2 Safety instructions for installation
and operation
1.2.1 General
▪ For any work on the equipment, which extends above and beyond
the operation of the regulating system, the details provided in the
supplementary documents must be observed, particularly with re-
gard to safety instructions.
Daikin RoCon+ HP
Daikin controller RoCon+ HP1
008.1447899_00 – 09/2019 – EN
1

General safety precaution

Avoiding danger
The Daikin Altherma ETS(X/H) is state of the art and is built in ac-
cordance with all recognised technical regulations. However, im-
proper use may result in serious physical injuries or death, as well as
property damage.
To avoid hazards, only operate the Daikin Altherma ETS(X/H):
▪ as stipulated and in perfect condition,
▪ with an awareness of safety and the dangers involved.
This assumes knowledge and use of the contents of this manual, all
applicable documents, the relevant accident prevention regulations
as well as the recognised safety-related and occupational health
rules.
Display of the RoCon+ controller
Certain screen displays or menu items may deviate from those
shown in these instructions depending on the national or equipment
variant of the Daikin Altherma ETS(X/H) or the user status logged
onto the controller.
1.2.2

Intended use

The RoCon+ HP controller must only be used in Daikin Altherma
ETS(X/H) heat pumps that are approved for the regulating system.
The RoCon+ HPcontroller must only be operated in accordance with
the specifications in these instructions.
Any other use outside the intended use is considered as improper.
The operator alone bears responsibility for any resulting damage.
For any work on the equipment that extends above and beyond the
operation of the regulating system, the details provided in the sup-
plementary documents must be observed, particularly with regard to
safety instructions.
Documentation
The technical documentation included in the scope of supply is a
constituent part of the equipment. It must be stored in such a way
that it can be consulted at any time by the operator or technicians.
Operating Instructions
5