Statistics; Month; Total - Daikin RoCon+ HP1 ETSH16P30D Manuel D'utilisation

4 Function
4.9

Statistics

INFORMATION
The values listed in this menu are approximate values. In
particular if glycol is present in the system, there may be
greater deviations from real performance data.
[→ Main menu → Statistics]
This menu can be used to access the values for the power output
and run times of the heat pump and its components. The [Electr. en-
ergy total] parameter describes the total electrical power consump-
tion of the heat pump and its components. All other values refer to
the energy provided by the heat pump or the run time of various
components.
4.9.1

Month

[→ Main menu → Statistics → Month]
This menu can be used to call up summed values for the power out-
put and power consumption over the month. The displayed value is
assigned to the month shown in blue on the diagram. The various
values can be displayed by turning the rotary switch.
4.9.2

Total

[→ Main menu → Statistics → Total]
This menu can be used to call up summed values for the power out-
put and power consumption of the heat pump since commissioning
(or since the last reset by a specialist).
Operating Instructions
24
Daikin RoCon+ HP
Daikin controller RoCon+ HP1
008.1447899_00 – 09/2019 – EN