External Operation - Daikin RoCon+ HP1 ETSH16P30D Manuel D'utilisation

Time period
Single day of the week (Monday,
Tuesday ...)
Working week (Monday to Fri-
day)
Weekend (Saturday to Sunday)
Entire week (Monday to Sunday) 1. 06:00 to 22:00
Tab. 3-4 Structure of the permanent time programs
INFORMATION
Time settings for a switching cycle in a weekday or block
program will also be accepted for other time periods as
long as they are for the same weekdays.
▪ The starting time in the first switching cycle is changed
from 06:00 am to 05:00 am for the individual weekday
"Monday". In the period " Monday to Friday" and
"Monday to Sunday", the first switching cycle is auto-
matically changed from 06:00 to 05:00.
Fig. 3-9 Time program function with overview level (left) and set-
ting level (right)
Example: For the [Heating circuit auto. 1] program, set switch cycles
1 and 2 for Monday to Friday [→ Main menu → Time program → HC
auto 1]:
1 Turn the rotary button clockwise until the Setting icon turns blue.
2 Briefly press the rotary button to confirm ("OK").
è Display changes to setting level with blue flashing period se-
lection.
3 Turn the rotary switch clockwise until the required time period is
displayed.
4 Briefly press the rotary button to confirm ("OK").
è The display changes to the input window for the start time of
the first switching cycle.
5 Briefly press the rotary button to confirm ("OK").
è Input window for start time of the first switching cycle flashes
blue.
6 Turn the rotary button clockwise until the required start time is
displayed.
7 Briefly press the rotary button to confirm ("OK").
è The display changes to the input window for the end time of
the first switching cycle.
8 Turn the rotary button clockwise until the required end time is
displayed.
9 Briefly press the rotary button to confirm ("OK").
è The display changes to the input window for the start time of
the second switching cycle.
Daikin RoCon+ HP
Daikin controller RoCon+ HP1
008.1447899_00 – 09/2019 – EN
Switching cycle
1. 06:00 to 22:00
2. xx:xx to xx:xx
3. xx:xx to xx:xx
1. 06:00 to 22:00
2. xx:xx to xx:xx
3. xx:xx to xx:xx
1. 06:00 to 22:00
2. xx:xx to xx:xx
3. xx:xx to xx:xx
2. xx:xx to xx:xx
3. xx:xx to xx:xx
10 Briefly press the rotary button to confirm ("OK").
è Input window for the start time of the second switching cycle
flashes blue.
11 Turn the rotary button clockwise until the required start time is
displayed.
12 Briefly press the rotary button to confirm ("OK").
è The display changes to the input window for the end time of
the second switching cycle.
13 Turn the rotary button clockwise until the required end time is
displayed.
14 Briefly press the rotary button to confirm ("OK").
è The display changes to the input window for the start time of
the third switching cycle.
15 Turn the rotary button clockwise until the Confirm icon turns
blue.
è The display changes to the Confirm icon.
16 Briefly press the rotary button to confirm ("OK").
è The programming is saved.
è The setting level is exited.
è Selected switching cycles are highlighted in grey.
17 Turn the rotary button anticlockwise until the Back icon turns
blue.
18 Briefly press the rotary button to confirm ("OK").
è The menu is exited
3.3.8

External operation

In addition to operation via the integrated RoCon+ HP controller, the
system can also be adjusted and operated via external devices.
Operation via the Internet
An optional gateway (EHS157056) can be used to connect the Ro-
Con+ HP controller to the Internet. This enables remote control of
the RoCon+ HP by mobile phone (using an app).
Operation via the room station
It can also be operated via the optional EHS157034 room controller.
For this purpose, observe the operating instructions enclosed with
the device.
3 Operation
Operating Instructions
11