Air Conditioner Installation - Tekno Point WINE-14 Manuel D'utilisation Et Installation

manuale di istruzioni uso e manutenzione WINE-14
• avoid spraying flammable sprays directly against the air conditioner because fire can occur;
• do not cover the air conditioner;
• avoid that the humidity inside the room is not more than 90% because humidity could form on
the outside of the air conditioner with consequent drops falling and therefore do not place objects
under the indoor unit because they could be damaged
b.

Air conditioner installation

Choose the wall where to mount the air conditioner, which is usually installed on the short wall
of a room and about in the middle of it.
Carefully choose the expansion plugs best suited to the type of wall and that are able to
withstand the weight of the air conditioner in total 40 kg;
Behind the air conditioner the through holes must be made on the wall (by means of coring) of
air intake and delivery communicating with the outside and for tracing the holes the special
DIMA supplied must be used.
PHASE 1: position the DIMA sheet on the exact point of the wall and fix it with pieces of
adhesive tape, the dashed section of the machine space must be at least 250 mm from the
ceiling;
PHASE 2: drill the holes of the dowels with a hammer drill and insert the fixing bolts of the
bracket;
PHASE 3: drill the holes by coring at least 150 mm in diam .;
PHASE 2
PHASE 3
www.teknopoint.com
MACHINE OVERVIEW LINE
PHASE 1
Pag. 7