Power Supply And Humidifier Connection To The Air Conditioner - Tekno Point WINE-14 Manuel D'utilisation Et Installation

manuale di istruzioni uso e manutenzione WINE-14
Note
- bleed the water supply hose before connecting it to the humidifier;
- with the installation of the humidifier on walls and brick walls, it is possible to amplify vibrations
and noise that are not highlighted if the wall has been made of a more "compact" material;
- check the hardness of the water connected to the humidifier because, by evaporating, it could
leave lime scale deposits on the
il cavo standard delle sonde è lungo 3 metri e quindi è possibile posizionarlo distante dal
climatizzatore ed umidificatore magari vicino alle bottiglie di maggior interesse. Evitare l'
esposizione diretta al flusso d' aria dell' unità interna e dell' eventuale umidificatore.
power supply and humidifier connection to
the air conditioner
The plug of the electric power supply cable,
supplied, must be connected to the electrical
socket located behind the air conditioner.
Next to the power supply socket there is the
power socket of the humidifier which is
already connected to the humidifier itself.
electrical parts protections
The protections have been installed both to protect the plant
lines and the system components.
ACCESS TO FUSES
fuse F1: gently pull the drawer located under the power sup-
ply socket (photo 1)
www.teknopoint.com
bottles.posizionamento sonda di temperatura/umidità
fuse F2-F3: remove the external "cover" of the air conditioner
using the Allen wrench provided and then remove the electrical
parts protection plate with a cross-head screwdriver by unscrewing
the two screws highlighted by the red arrows. (photo 2)
TIPO DI FUSIBILI
F1 - fusibile alimentazione elettrica/compressore: tipo T8A
foto 2
F2 - fusibile a protezione controllore digitale: F4A
foto 2
F3 - fusibile a protezione controllore digitale: F4A
PRESENTE)
foto 1
foto 1
Pag. 11
(SE