Temperature / Humidity Measuring Probes; Air Humidifier; General Technical Data - Tekno Point WINE-14 Manuel D'utilisation Et Installation

manuale di istruzioni uso e manutenzione WINE-14
c.

temperature / humidity measuring probes

The humidity measurement probe (brass filter) is also combined with the
temperature measurement probe (black element); the cable is 3
meters long and therefore it is possible to place the probes in the
desired place.
The probe unit is used to monitor the two parameters, interacts with the
digital controller mounted on the air conditioner that regulates the
operation of the entire air conditioning unit including the humidifier
Accuracy degree reading ± 5% and temperature ± 2%;
NB: the instruments are made, tested and calibrated, by Dixell; using equipment verified with
Class A instruments (Certificates with an accredited laboratory) by qualified personnel as
required by their Quality Manual ISO 9001: 2008
d. Air humidifier (optional)
The humidifier of the adiabatic water atomization type brings the% of missing humidity
required by the digital controller. It must be
connected to the water supply (better the
aqueduct) and electrically to the appropriate socket
on the back of WINE-14. The unit foresees the
unloading of water for each unused end of the cycle
to be conveyed in the same condensation
container of the air conditioner.
Supply water pressure: min. 1 max. 3
Water consumption: 0.85 l / h
Humidifier weight: 4.30 kg
Rated power: 40 w
Air flow rate: 80 mc / h

4. GENERAL TECHNICAL DATA

Local cellar volume
Supply voltage
Capacity in cooling
Power absorbed in cooling
Rated current in cooling
T. minimum of internal operation
Max power abs. in cooling
Max current abs. in cooling
T. min / max for external operation.
Type compressor
www.teknopoint.com
WINE-14
V/Ph/Hz
(W)
(W)
(A)
(°C)
(W)
(A)
(°C)
Pag. 5
Up to 30 mc
230/1/50
1'350
550
2,9
10 °C
700
3,5
-5 - 38 °C
Hermetic rotary
note
(*)
(**)