Indoor units must be securely attached to the wall or ceiling. The block or ceiling to which they are
attached must be able to support the load generated by the units.
Operating temperatures
Cooling mode max. temperature
Heating mode max.temperature
NOTE:
The operating temperature range (outdoor temperature) for cooling is 18 ℃ ~ 52 ℃ ; The heating
temperature range for the low temperature system model is -15 ℃ ~ 24 ℃ ; The heating temperature
range with low temperature system is -20 ℃ ~ 24 ℃.
Indoor unit installation
Qualifications required for installation and maintenance
All workers who install refrigeration systems should have valid certification issued by the competent
authority, and qualification for the treatment of the refrigeration system recognized by this sector. If
another technician is needed for the maintenance and repair of the appliance, these must be supervised by
the person who is qualified for the use of the flammable refrigerant.
Installation notes
It is not allowed to use the air conditioner in a room where a fire has occurred.
Drilling holes or burning the connection pipe is not allowed.
The air conditioner must be installed in a room that guarantees the minimum surface. The
minimum surface is shown in table 1
Obligation to check for leaks after installation.
Table 1
Gas
<=
charge
1.2
(kg)
Pos.
/
floor
Minimum
area of
Pos.
/
the room
Window
(m2)
Pos.
/
Wall
Pos. on
the
/
ceiling
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
Dry bulb/Wet bulb (°C)
1.3
1.4
1.5
14.5 16.8 19.3 22.0 24.8 27.8 31.0 34.4 37.8 41.5 45.4 49.4 53.6
5.2
6.1
7.0
1.6
1.9
2.1
1.1
1.3
1.4
COMMERCIALE@TEKNOPOINT.COM –
MUI_WINE_Ita_Eng_Fra_Deu_TP/Rev.00/Data 28.09.2020
Indoor
32/23
27/-
1.6
1.7
1.8
1.9
7.9
8.9
10.0 11.2 12.4 13.6 15
2.4
2.8
3.1
3.4
1.6
1.8
2.1
2.3
WWW.TEKNOPOINT.COM
43
External
Dry bulb/Wet bulb (°C)
52/26
24/18
2.0
2.1
2.2
2.3
16.3 17.8 19.3
3.8
4.2
4.6
5
2.6
2.8
3.1
3.4
ENGLISH
2.4
2.5
5.5
6.0
3.7
4.0