On-Off Button; Mode Button; Fan Button - Tekno Point WN-09 Manuel D'utilisation

ENGLISH

ON-OFF button

By pressing this button you can turn the air conditioner on or off.

MODE button

By pressing this button you can select the desired operating mode.
AUTO mode automatically operates the air conditioner in cooling or heating mode according to the factory
settings.
The temperature therefore cannot be set and will not appear on the display.
Otherwise all other settings are possible.
COOL mode operates the air conditioner will operate in cooling mode.
Therefore, using the (+) and (-) keys, it is possible to change the setting temperature you want to reach.
DRY mode operates the air conditioner in dehumidification mode. The ventilation speed will not be
adjustable and will forcibly be the lowest. Otherwise all other settings are possible.
FAN mode operates the air conditioner in ventilation only. The air leaving the unit will be at room
temperature. The internal environment will therefore not be heated or cooled. All settings are possible. In
this operating mode, the foreign unit will never be in operation.
HEAT mode operates the air conditioner in heating mode.
Therefore, using the (+) and (-) keys, it is possible to change the setting temperature you want to reach.

FAN button

By pressing the FAN key it is possible to adjust the ventilation speed of the unit.
NOTE:
- In AUTO mode, the air conditioner will select the correct fan speed automatically based on the
ambient temperature.
- The speed in DRY mode is forcibly set in FAN1
- The STEPLESS SPEED mode allows adjustment of the fan ventilation speed based on the "+" or "-"
button. The set speed will be visible on the temperature display in percentages from 1% to 100%.
The limit values are: "L" which indicates minimum speed; "H" indicates maximum speed.
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
COMMERCIALE@TEKNOPOINT.COM –
MUI_WINE_Ita_Eng_Fra_Deu_TP/Rev.00/Data 28.09.2020
WWW.TEKNOPOINT.COM
48