Tekno Point WN-09 Manuel D'utilisation page 60

ENGLISH
5. Connecting the refrigerant piping to the unit
The connection of the refrigerant gas pipes is a very important and delicate procedure to guarantee the
pressure seal and the correct functioning of the air conditioning system.
1. Make the flare with the flare tool
2. Point the joint to the corresponding flare:
3. Tighten the nut by hand to assess the centricity of the flaring. If the flaring is central and cracks
have been generated, cut the final part of the pipe and redo the folder.
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
COMMERCIALE@TEKNOPOINT.COM –
Pipe joint
MUI_WINE_Ita_Eng_Fra_Deu_TP/Rev.00/Data 28.09.2020
Union nut Pipe
WWW.TEKNOPOINT.COM
58
Cut off the
hole