Tekno Point WN-09 Manuel D'utilisation page 51

ENGLISH
VERTICAL SWING button
By pressing the VERTICAL SWING button. VERTICAL the vertical swing function is activated or canceled. The
remote control automatically switches to the static swing condition.
Press the MODE key and the VERTICAL SWING button simultaneously on the remote control when it is in
the OFF state to alternate between simple oscillation and static swing.
In static oscillation conditions, by pressing the VERTICAL SWING button, the oscillation angle of the flap
varies as shown in the following diagram:
NOTE:
When the AUTOMATIC VERTICAL SWING key is selected with the remote control, the automatic swing is
activated. The flap will automatically swing from the minimum angle to the maximum angle.
When selecting the other modes with the remote control, the flap is in a fixed position. The flap will
maintain the set position.
HORIZONTAL SWING button (Only where available)
By pressing the HORIZONTAL SWING button, the horizontal oscillation function is activated or cancelled.
The remote control automatically switches to the static oscillation condition.
Press the MODE key and the HORIZONTAL SWING button simultaneously on the remote control when it is
in the OFF state to alternate between simple oscillation and static oscillation.
In static oscillation conditions, by pressing the HORIZONTAL SWING button the flap oscillation angle varies
as shown in the following diagram:
NOTE:
When the AUTOMATIC HORIZONTAL SWING button is selected with the remote control, the automatic
swing is activated. The flap will automatically swing from the minimum angle to the maximum angle.
When selecting the other modes with the remote control, the flap is in a fixed position. The flap will
maintain the set position.
(+) And (-) buttons
Press the (+) or (-) button once to increase or decrease the temperature set on the remote control by 1 ° C.
By holding down the (+) or (-) button the temperature set on the remote control will change more quickly.
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
COMMERCIALE@TEKNOPOINT.COM – WWW.TEKNOPOINT.COM
MUI_WINE_Ita_Eng_Fra_Deu_TP/Rev.00/Data 28.09.2020
49