INSTRUCTIONS FOR INSTALLATION
Positioning the white carrara stones
The appliance is supplied with white carrara stones.
• Fill the burner tray with vermiculite (1) and distribute
evenly, (fig. 19).
• Fill the burner tray and the surrounding tray with the
white carrara stones (2). Distribute the stones in a single
layer. Stones on top of each other will distort the flame
effect (figs. 20 and 21).
• Make sure that there are no stones in front or between
the pilot light burner (3) as this could prevent the pilot
light from working properly (fig. 18).
• N.B.:The burner tray must always be filled with
vermiculite.This is essential to warrant the long
service life of the burner tray.
3
1
fig. 19
2
fig. 20
3
fig. 21
fig. 22
22
fig. 18