Brake Pedal; Drive Pedal - EMAK 91 Manuel D'utilisation

– To go from one height to another, press
the release button at the end of the
lever.
4.9 LEvER FOR TIPPING
THE GRASS-CATCHER (if present)
This pull-out lever tips and empties the
grass-catcher. This means less work for
the operator.
Mechanical transmission
4.21 CLUTCH / BRAKE PEDAL
This pedal has two functions: during
the first part of its travel it acts as a
clutch, engaging and disengaging drive
to the wheels, and in the second part it
acts as a brake on the rear wheels.
IMPORTANT
pedal halfway between clutch
engagement or disengagement,
as this can cause overheating and
damage the transmission belt.
NOTE When the machine is moving,
keep your foot off the pedal.
Do not keep the
4.21
4.22
R N
1
2
3
4
5
4.22 SPEED CHANGE LEvER
This lever has seven positions for the
5 forward speeds, the neutral position
«N», and reverse «R».
To go from one speed to another,
press the pedal (4.21) halfway and shift
the lever as shown on the label.
WARNING!
reverse when the machine has
stopped moving.
Hydrostatic transmission

4.31 BRAKE PEDAL

This pedal works the brake on the rear
wheels.

4.32 DRIvE PEDAL

This pedal engages drive in the wheels
and controls the machine's forward and
reverse speeds.
Only shift into
4.31
4.32
N
F
R
B
4.33
A
EN 13