Intended Use; After-Sales Service; Improper Use - EMAK 91 Manuel D'utilisation

2. DESCRIPTION OF THE MACHINE
AND ITS RANGE OF USE
This machine is a garden tool and pre-
cisely a ride-on mower.
The machine is equipped with an engine
which drives a cutting unit protected by a
casing, as well as a transmission unit that
moves the machine.
The operator is able to operate the ma-
chine and use the main controls, always
seated in the operator's position.
The devices fitted on the machine stop the
engine and the cutting device within a few
seconds, should the operator behave in a
manner that does not comply with the nec-
essary safety precautions.

Intended use

This machine was designed and built to
cut grass.
The use of special accessories pro-
vided for by the Manufacturer as original
equipment or which may be purchased
separately, allows this work to be done in
various operating modes, illustrated in this
manual or the instructions that accompany
the single accessories.
Likewise, the intended use can be ampli-
fied to include other functions by applying
supplementary tools (if provided for by the
Manufacturer), abiding by the restrictions
and conditions indicated in the instructions
accompanying the equipment.

Improper use

Any other usage not in keeping with the
abovementioned ones may be hazardous
and harm persons and/or damage things.
Examples of improper use may include,
but are not limited to:
– transporting people, children or animals
on the machine or on a trailer;
EN 2
– towing or pushing loads without the use
of the specific accessory for towing;
– use of the machine for riding over unsta-
ble, slippery, icy, stony, rough, marshy
ground or puddles that do not allow
the consistency of the ground to be as-
sessed;
– use the blades on surfaces other than
grass;
– use of the machine for leaf or debris col-
lection.
Improper use of the machine will invalidate
the warranty, relieve the Manufacturer
from all liabilities, and the user will conse-
quently be liable for all and any damage or
injury to himself or others.

3. AFTER-SALES SERvICE

This manual gives all the necessary in-
structions for using the machine and carry-
ing out basic maintenance.
Any adjustments or maintenance opera-
tions not described in this manual must be
carried out by your Dealer or a specialized
Service Centre. Both have the necessary
knowledge and equipment to ensure that
the work is done correctly without affecting
the safety of the machine.
If you wish, you can ask your dealer to pre-
pare a maintenance programme personal-
ised to your needs. This will help you keep
your new purchase in peak performance
and maintain its value over time.