Controls And Instruments; Steering Wheel; Key Ignition Switch; Parking Brake - EMAK 91 Manuel D'utilisation

4. CONTROLS AND INSTRUMENTS

4.2a
4.5
4.8

4.1 STEERING WHEEL

Turns the front wheels.
4.2 THROTTLE
This regulates the engine's r.p.m. The
positions are indicated on a plate showing
the following symbols:
«CHOKE»
«SLOW»
«FAST»
– The «CHOKE» position enriches the
mixture so must only be used for the
time necessary when starting from cold.
– When moving from one area to another,
put the lever in a position between
«SLOW» and «FAST».
– When cutting, shift into «FAST».
4.6
4.2
cold starting
for minimum
engine speed
or maximum
engine speed
4.1
4.9
4.2a CHOKE CONTROL (if fitted)
It enriches the mixture and must only
be used for the necessary time for cold
starting.

4.3 KEY IGNITION SWITCH

This key operated control has three
positions:
«OFF» everything is switched off;
«ON» activates all parts;
«START» connects the starter motor.
If you release the key on «START», it will
automatically return to «ON».

4.4 PARKING BRAKE

This brake stops the machine from mov-
ing when it has been parked. There are
two positions:
4.7 4.3
B
A
A
B
4.4
EN 11