Identification Of The Machine And Components - EMAK 91 Manuel D'utilisation

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS

2.1 IDENTIFICATION
OF THE MACHINE
The label located near the battery housing
has the essential data of each machine.
8 5
-
kW
kg
3 9
1. Acoustic power level
according to directive 2000/14/CE
2. Conformity mark
according to directive 2006/42/CE
3. Year of manufacture
4. Operating engine power and speed
5. Type of machine
6. Serial number
7. Weight in kg
8. Name and address
of manufacturer
9. Type of transmission (if indicated)
10. Article Code
The example of the declaration of con-
formity can be found on the penultimate
page of the manual.
Write your machine's serial
4 7
L
WA
/min
dB
6 10 2 1
number here (6)
2.2 IDENTIFICATION
OF MAIN COMPONENTS
The main components of the machine
have the following functions:
16 20 19
11 12
11. Cutting deck: this is the guard
housing the rotating blades.
12. Blades: these are what cut the grass.
The wings at the ends help convey
the cut grass towards the collector
channel.
13. Collector channel: this is the part
connecting the cutting deck to the
grass-catcher.
14. Grass-catcher: as well as collecting
the grass cuttings, this is also a safety
element that stops any objects drawn
up by the blades from being thrown
outside of the machine.
15. Rear discharge guard (available
upon request): this can be fitted
in place of the grass-catcher and
prevents objects from being drawn up
by the blades and thrown far from the
machine.
17 18 15
13
EN
14
7