To Stop Playback - Sony R5520 Mode D'emploi

Designating the
Total Playing Time -
Time Edit
To play the program
Press >.
The selections for side A will be played and
then the unit will pause. "B" lights up in
the tape side indicator. Set the tape to the
beginning of side B, then press E> or HI.
The selections for side B will be played.
Note
Playback can be performed when "EDIT" is
displayed.
To stop playback
Press @.
You can play the same program repeatedly
as long as you do not cancel time edit or
erase the program.
To cancel time edit
Press CONTINUE and return to the
continuous playing mode.
The program will be erased.
To erase the entire program
Press Ml once during stop; twice during
playback.
The program is also erased, when you turn
2 2s off the unit or open the disc table.
Oe: 3 ' ay 3
is
i:
To include desired selections in
the program
1 Make your own program of the desired
selections.
See page 60 for instructions.
2 Follow the procedures as shown on the
preceding page. Just designate the
length of your tape, and you need not
subtract the playing time of your
program. The unit will place your
selections at the beginning of its program
and add other selections to fit the
remaining time.