Publicité
Machine installation should only be carried out by
a qualified technician.
Contact your Brother dealer or a qualified electri-
cian for any electrical work that may need to be
done.
The sewing machine weighs more than 52 kg. The
installation should be carried out by two or more
people.
Do not connect the power cord until installation is
complete, otherwise the machine may operate if
the treadle is depressed by mistake, which could
result in injury.
Be sure to connect the ground. If the ground con-
nection is not secure, you run a high risk of receiv-
ing a serious electric shock, and problems with cor-
rect operation may also occur.
All cords should be secured at least 25 mm away
from any moving parts. Furthermore, do not ex-
cessively bend the cords or secure them too firmly
with staples, otherwise there is the danger that fire
or electric shocks could occur.
This sewing machine should only be used by op-
erators who have received the necessary training
in safe use beforehand.
The sewing machine should not be used for any
applications other than sewing.
Be sure to wear protective goggles when using the
machine.
If goggles are not worn, there is the danger that if a
needle breaks, parts of the broken needle may en-
ter your eyes and injury may result.
Turn off the power switch at the following times,
otherwise the machine may operate if the treadle
is depressed by mistake, which could result in in-
jury.
• When threading the needle
• When replacing the bobbin and needle
• When not using the machine and when leaving
the machine unattended
* When using a clutch motor, the motor will keep
turning even after the power is switched off as a
result of the motor's inertia. Wait until the motor
stops fully before starting work.
CAUTION
Installation
Sewing
LS2-B891, LT2-B892 (English)
LS2-B891, LT2-B892
Install the belt guards to the machine head and
motor.
If using a work table which has casters, the casters
should be secured in such a way so that they can-
not move.
Use both hands to hold the machine head when
tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine
head may cause your hand to slip, and your hand
may get caught.
Be sure to wear protective goggles and gloves when
handling the lubricating oil, so that no oil gets into
your eyes or onto your skin, otherwise inflamma-
tion can result.
Furthermore, do not drink the oil under any circum-
stances, as they can cause vomiting and diarrhoea.
Keep the oil out of the reach of children.
If using a work table which has casters, the casters
should be secured in such a way so that they can-
not move.
Attach all safety devices before using the sewing
machine. If the machine is used without these de-
vices attached, injury may result.
Do not touch any of the moving parts or press any
objects against the machine while sewing, as this
may result in personal injury or damage to the ma-
chine.
Use both hands to hold the machine head when
tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine
head may cause your hand to slip, and your hand
may get caught.
If an error occurs in machine operation, or if abnor-
mal noises or smells are noticed, immediately turn
off the power switch. Then contact your nearest
Brother dealer or a qualified technician.
If the machine develops a problem, contact your
nearest Brother dealer or a qualified technician.
ii
Publicité
