Vehicle Configuration Menu - A.E.B. AEB215 Manuel D'utilisation

DISLAY PARAMETERS

VEHICLE CONFIGURATION MENU

From this menu it is possible to change the setting of the GALILEO E.C.U. in order to adapt it to the
different characteristics of each vehicle and to different operational conditions.
Below is a table that indicates all the possible settings, as well as their logical order in the vehicle
configuration menu. The settings in the boxes outlined with broken line are displayed only if the
corresponding options are activated.
ACTUATOR POSITION
DURING FULL THROTTLE
⇓
FULL THROTTLE TPS
DEFAULT LOCKED VALUE
62 - 188
IGNITION TYPE OR
NUMBER OF CYLINDERS
⇓ ⇓ ⇓ ⇓ ⇓
TYPE OF RPM SIGNAL
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
TYPE OF PETROL TO
ALT. FUEL SWITCH-OVER
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
FUEL SWITCH-OVER
TEMPERATURE
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
PETROL TO ALT. FUEL
SWITCH-OVER RPM
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
SWITCHER TYPE
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
DURATION OF FUEL
OVERLAP
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
TYPE OF ALT. FUEL
LEVEL INDICATOR
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
TPS TYPE
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
O2 SENSOR TYPE
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
TYPE OF O2 SENSOR
SIMULATION
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
O2 SENSOR READING
DELAY
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
MAXIMUM ACTUATOR
POSITION
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
MINIMUM ACTUATOR
POSITION
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
⇐ ⇐ ⇐ ⇐ ⇐
FULL THROTTLE OPTION
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
CUT-OFF OPTION
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
⇐ ⇐ ⇐ ⇐ ⇐
OPTIONAL DEFAULT LOCK
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
DRIVING STYLE
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
IDLE TPS HYSTERESYS
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
ERASE MEMORY
⇒ ⇒ ⇒ ⇒ ⇒
HIGH WAVE DURATION
⇓
LOW WAVE DURATION
⇓ ⇓
O2 SENSOR OPEN
CIRCUIT DURATION
⇓ ⇓
N° OF SIMULATED WAVES
LOWER RPM CUT-OFF
⇒ ⇒ ⇒ ⇒ ⇒
THRESHOLD
⇓
ACTUATOR POSITION
DURING CUT-OFF
Is215-2 Rev. 110105-2
GALILEO