Arneg Colonia 3 G2 Mode D'emploi page 41

21. Maintenance and cleaning
DANGER! Live parts. Electrocution
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
DO NOT splash, spray water or detergent directly onto the electrical parts of the
cabinet (fans, light fixtures, electrical cables, etc.).
DO NOT touch the cabinet with wet or damp hands or feet.
ATTENTION! Cold surfaces. Wounds, burns. Glass breakage
Wait until the glass parts have reached ambient temperature.
DO NOT use hot water on the cold glass surfaces.
Protect the hands with work gloves.
i
The goods deteriorate due to microbes and bacteria.
Respect the hygiene standards and the cold chain to ensure the consumer's health.
The cleaning operations must include:
Step Name:
1 Washing
Sanitisation :
2
3 Rinsing
4 Drying
21.1. Cleaning products
Use
DO NOT use
21.2. General instructions
The surfaces to be cleaned and the detergents and water used for cleaning must not exceed
a maximum temperature of 30°C.
Remain a minimum distance of 30 cm from the surfaces to be cleaned .
05060154 00 26/05/2014
roughing, removal of approximately 97% of the dirt)
cleansing+disinfection:
- cleansing: removal of visible dirt
- disinfection: removal of pathogenic micro-organisms that remain
after washing
clean water, maximum temperature 30°C
soft cloth
mild and neutral detergents
alcohol detergents or similar products to clean parts in methacrylate
(Plexiglas)
detergents with powder, granules,
acid and alkali (chlorine bleach, ammonia)
concentrated
of unknown chemical composition
abrasives, chemical/organic solvents
scouring pads, steel wool, pointed tools
aggressive, solvent detergents (acetic acid, citric acid, etc.)
Colonia 3 - Mini Colonia
Description
English
41